Buntrock Industries, Inc. - Shell Room Equipment

1. Check items from the list below to receive images and more information.
2. Then submit the form and your list will be emailed along with any message to Buntrock.
3. The requested information and images will be gathered and sent back to you by email.
Note: The items you check will be saved as you navigate through the site.
You may submit your list at any time.

	ROMMCO® Turntable Slurry Mixers	Capacity: 30 gal to 360 gallon. Made of 304 stainless, all welded water tight. Reinforcing angle rings are welded around the top and bottom of the tank. Tank is bolted to the turn table for easy removal. Tank rotation speed is 30 RPM. "L" shaped mixing blades.
	KENT Fiberglass Tanks	These custom molded fiberglass slurry mixing tanks are made by spray or vacuum lay-up techniques. They are sized from 50 gallons to 340 gallons and can be purchased with stands.
	Lightnin' Mixers	Portable, Fixed Mount Mixers available in a variety of sizes.
	Hockmeyer High-Speed Disperser	Hockmeyer has been a preeminent supplier of process mixing equipment for over thirty years. Satisfying the needs of coatings, adhesives and chemical products manufacturers has positioned Hockmeyer as a forerunning supplier of equipment that helps to produce quality, profitable products. The high speed disperser will mix a slurry ready for use in 30 minutes - start to finish!
	ROMMCO® Fluid Beds	Manufactured in two sections of all welded steel. A diffuser plate is a one piece permeable ceramic unit that is available in three different porosities. The air inlet port is sized to match the air supply piping which may be either low pressure blower or plant compressed air. Beds are also avialable as a complete operating system (including blower). Custom sizes and multiple stations are available.
	Spencer Blowers	Standard "overhang-design" blowers are sized for your fluidbed.
	Torit Dust Collection Systems	Breathe easy - a Torit system can be your answer to three problems - Energy, OSHA and Labor Savings. Standard and custom units available.
	Slurry Test Kit	Basic apparatus to monitor slurries quickly and accurately to insure proper control. Contains suggested procedure for measuring specific gravity.
	Vac-U-Max Pneumatic Equipment	Industrial vacuum equipment - can be used for transfer of refractory sands.
	Nametre Viscometer	This is a precision instrument for rapidly measuring viscosity with extreme accuracy. A vibrating sphere or cylinder is placed in a beaker containing the sample liquid; a viscosity measurement is taken in seconds. A wide range of viscosity can be measured from water-thin liquids to oils or liquid pattern waxes. The instrument automatically corrects for density and temperature.

to top